 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PD-2.507 rev. A 12/98 HFA100MD60D HEXFRED Features Reduced RFI and EMI Reduced Snubbing Extensive Characterization of Recovery Parameters TM Ultrafast, Soft Recovery Diode Anode 1 AC Cathode 2 Isolated Base VR = 600V VF(typ.) = 1.1V IF(AV) = 100A Qrr (typ.) = 300nC IRRM(typ.) = 8A trr(typ.) = 33ns di(rec)M/dt (typ.) = 240A/s Description HEXFRED diodes are optimized to reduce losses and EMI/RFI in high frequency power conditioning systems. An extensive characterization of the recovery behavior for different values of current, temperature and di/dt simplifies the calculations of losses in the operating conditions. The softness of the recovery eliminates the need for a snubber in most applications. These devices are ideally suited for power converters, motors drives and other applications where switching losses are significant portion of the total losses. TM Absolute Maximum Ratings (per Leg) Parameter VR IF @ TC = 25C IF @ TC = 100C IFSM EAS PD @ TC = 25C PD @ TC = 100C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current Continuous Forward Current Single Pulse Forward Current Non-Repetitive Avalanche Energy Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range TO-244AB (ISOLATED) Max. 600 83 40 400 220 180 71 -55 to +150 Units V A J W C Thermal - Mechanical Characteristics Parameter RthJC RthCS Wt Junction-to-Case, Single Leg Conducting Junction-to-Case, Both Legs Conducting Case-to-Sink, Flat , Greased Surface Weight Mounting Torque Terminal Torque Vertical Pull 2 inch Lever Pull Min. 30 (3.4) 30 (3.4) Typ. 0.10 79 (2.8) Max. 0.70 0.35 40 (4.6) 40 (4.6) 80 35 Units C/W K/W g (oz) lbfin (Nm) lbfin Note: Limited by junction temperature L = 100H, duty cycle limited by max TJ 125C Mounting surface must be smooth, flat, free or burrs or other protrusions. Apply a thin even film or thermal grease to mounting surface. Gradually tighten each mounting bolt in 5-10 lbfin steps until desired or maximum torque limits are reached. Module 1 HFA100MD60D PD-2.507 rev. A 12/98 Electrical Characteristics (per Leg) @ TJ = 25C (unless otherwise specified) Parameter V BR V FM Cathode Anode Breakdown Voltage Max Forward Voltage Min. Typ. Max. Units 600 1.2 1.4 1.1 4.0 1.0 140 7.0 1.4 1.6 1.3 20 4.0 250 V V A mA pF nH Test Conditions I R = 100A I F = 50A See Fig. 1 I F = 100A I F = 50A, TJ = 125C VR = VR Rated See Fig. 2 TJ = 125C, VR = 480V See Fig. 3 VR = 200V From top of terminal hole to mounting plane IRM CT LS Max Reverse Leakage Current Junction Capacitance Series Inductance Dynamic Recovery Characteristics (per Leg) @ TJ = 25C (unless otherwise specified) Parameter trr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time Min. Typ. Max. Units Test Conditions Peak Recovery Current Reverse Recovery Charge Peak Rate of Fall of Recovery Current During tb 33 IF = 1.0A, dif/dt = 200A/s, VR = 30V 76 115 ns TJ = 25C See 130 200 TJ = 125C Fig. 5 IF = 50A 8.0 15 TJ = 25C See A 12 22 TJ = 125C Fig. 6 VR = 200V 300 900 TJ = 25C See nC 780 2200 TJ = 125C Fig. 7 dif/dt = 200A/s 340 TJ = 25C See A/s 240 TJ = 125C Fig. 8 80.01 (3.150) 40.26 (1.585) 39.75 (1.565) 20.32 (0.800) 17.78 (0.700) 7.49 (0.295) 6.99 (0.275) DIA. (2 PLCS.) 34.925 (1.375) REF. 63.50 (2.500) 60.96 (2.400) LEAD ASSIGNMENTS 1 - ANODE 2 - CATHODE 3 - ANODE 1/4-20 SLOTTED HEX 1 23.55 (0.927) 20.42 (0.804) 2 3 OUTLINE TO-244AB (ISOLATED) Dimensions in Millimeters and (Inches) 15.75 (0.620) 14.99 (0.590) 92.71 (3.650) 90.17 (3.550) 3.35 (0.132) 3.02 (0.119) 2 HFA100MD60D 1000 10000 PD-2.507 rev. A 12/98 Reverse Current - I R (A) T = 150C J 1000 100 T = 125C J Instantaneous Forward Current - I F (A) 10 100 TJ = 150C TJ = 125C TJ = 25C 1 T = 25C J 0.1 0 200 400 600 Junction Capacitance - C T (pF) 10 Fig. 2 - Typical Reverse Current vs. Reverse Voltage, (per Leg) 10000 Reverse Voltage - VR (V) A 1000 T = 25C J 1 0.0 100 1.0 2.0 3.0 Forward Voltage Drop - V FM (V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, (per Leg) 10 1 10 100 1000 Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage, (per Leg) Reverse Voltage - VR (V) 1 Thermal Impedance - Z thJC (K/W) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 P DM t 1 t2 Single Pulse (Thermal Resistance) 0.01 Notes: 1. Duty factor D = t / t 12 2. Peak TJ = PDM x Z thJC + TC 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t 1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics, (per Leg) 3 HFA100MD60D PD-2.507 rev. A 12/98 200 100 VR = 200V TJ = 125C TJ = 25C 160 VR = 200V TJ = 125C TJ = 25C I F = 100A I IRRM - (A) t rr - (ns) I F = 50A IF = 30A 10 120 I F = 100A I F = 50A I F = 30A 80 40 100 di f /dt - (A/s) 1000 1 100 di f /dt - (A/s) 1000 Fig. 5 - Typical Reverse Recovery vs. dif/dt, (per Leg) 3000 Fig. 6 - Typical Recovery Current vs. dif /dt, (per Leg) 10000 VR = 200V TJ = 125C TJ = 25C VR = 200V TJ = 125C TJ = 25C 2000 I F = 100A I F = 50A I F = 30A di(rec)M/dt - (A/s) Q RR - (nC) I F = 140A 1000 I F = 70A I F = 30A 1000 0 100 di f /dt - (A/s) 1000 100 100 di f /dt - (A/s) 1000 Fig. 7 - Typical Stored Charge vs. di f/dt, (per Leg) 4 Fig. 8 - Typical di (rec)M/dt vs. dif/dt, (per Leg) HFA100MD60D 3 PD-2.507 rev. A 12/98 IF trr ta tb 4 REVERSE RECOVERY CIRCUIT VR = 200V 0 Q rr I RRM 2 0.5 I RRM di(rec)M/dt 5 0.01 L = 70H D.U.T. D IRFP250 S 1 0.75 I RRM di f /dt 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 5. di(rec)M/dt - Peak rate of change of current during tb portion of trr dif/dt ADJUST G 1. dif /dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current Fig. 9 - Reverse Recovery Parameter Test Circuit L = 100H HIGH-SPEED SWITCH Rg = 25 ohm CURRENT MONITOR FREE-WHEEL DIODE + Vd = 50V Fig. 10 - Reverse Recovery Waveform and Definitions I L(PK) DUT DECAY TIME V (AVAL) V R(RATED) Fig. 11 - Avalanche Test Circuit and Waveforms WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. http://www.irf.com Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice. 5 |
Price & Availability of HFA100MD60D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |